Dycotec Materials
0
0 Items Selected

No products in the cart.

Electronic Assembly Adhesives: Conductive, Structural, Encapsulant & Die Attach

View our Assembly Materials products...

Dycotec develops and manufactures a comprehensive range of assembly materials used for joining two surfaces. Our portfolio includes electrically conductive adhesives and die attach materials for reliable interconnection, structural adhesives to increase mechanical robustness, electrically insulating bonds, and advanced encapsulants and underfills for environmental protection and mechanical stress mitigation. These materials are designed to meet the rigorous demands of applications in solar, semiconductor, automotive, and industrial electronics.

NameDescriptionApplicationsKey FeaturesDeposition MethodSubstratesProcessing Temperature (°C)Datasheethf:tax:pa_applicationshf:tax:pa_deposition-methodhf:tax:pa_substrate
DM-ENC-2500

Aqueous-based stretchable encapsulation coating for screen printing protective layers over conductive circuits in wearable devices, sensors, and medical electronics on elastomeric and textile substrates. Electrically insulating formulation protects stretchable conductive layers from abrasion and wash damage; cures at 120–180 °C.

wearablesscreentextile
DM-AS-10003-SYP

Manual syringe dispensing format of the DM-AS-10003 single-part solvent-free silver epoxy conductive adhesive, suited to lower-volume and prototyping assembly of heaters, sensors, and medical devices. Cures at 130–150 °C on flexible low-temperature substrates including textile, polycarbonate (PC), PET, and FR4, staying flexible once cured to absorb thermal expansion mismatch stress between bonded surfaces.

, flexible-electronicsmanual-syringefr4 pet
DM-ADH-11001S

Solvent-free epoxy structural adhesive for screen printing or syringe dispensing bonded joints in printed electronics and sensor assemblies. Provides strong non-conductive structural bonding where mechanical robustness rather than electrical continuity is required. Cures at 140 °C with excellent adhesion to glass and PET.

, , sensorsscreenglass pet
DM-SAS-10030-ST

Stencil and screen printing format of the DM-SAS-10030 flexible silver ECA, designed for higher-throughput component attachment in IME, wearables, sensors, and medical devices on PET, TPU, and textile substrates. Maintains joint flexibility when cured at 120 °C, achieving <200 mΩ/□/25µm with fine pitch resolution suited to dense component layouts.

, , , , flexible-electronics in-mold-electronicsscreen stencilpet pc
DM-AS-10003-SY

Pressure-time dispensing format of the DM-AS-10003 single-part solvent-free silver epoxy conductive adhesive, optimised for automated dispensing in heater, sensor, and medical device assembly. Cures at 130–150 °C on flexible low-temperature substrates including textile, polycarbonate (PC), PET, and FR4, staying flexible once cured to absorb the stress caused by thermal expansion mismatch between bonded surfaces.

, flexible-electronicspressure-time-dispensefr4 pet
DM-UFL-16001

Stretchable two-part epoxy underfill for syringe dispensing, designed for capillary underfilling of chip-scale packages and electronic components in IME and hybrid printed electronics assemblies. Transparent formulation is well suited to LED applications; low-temperature cure and stretchability minimise joint stress during thermoforming and injection molding while increasing component bond strength.

 

, , , , , in-mold-electronics wearablesmanual-syringepc textile tpu
DM-SAS-10030-SY

Pressure-time dispensing format of the DM-SAS-10030 flexible silver ECA, optimised for automated dispensing systems in IME, wearables, sensors, and medical device assembly on PET, TPU, and textile substrates. Maintains joint flexibility when cured at 120 °C, achieving <250 mΩ/□/25µm with fine pitch resolution and shear strength of ~50 kg/cm².

, , , flexible-electronics in-mold-electronicspressure-time-dispensepet pc
DM-SAS-10030-SYP

Manual syringe dispensing format of the DM-SAS-10030 flexible silver ECA, suited to lower-volume or prototyping assembly of IME, wearables, sensors, and medical devices on PET, TPU, and textile substrates. Maintains joint flexibility when cured at 120 °C, achieving <250 mΩ/□/25µm with fine pitch resolution and shear strength of ~50 kg/cm².

, , , flexible-electronics in-mold-electronicsmanual-syringepet pc
DM-SSA-10302S

Pressureless nanosilver sintering die attach paste for screen or stencil printing die bonds in wide-bandgap power electronics and optoelectronics. Sintering at 250 °C without applied pressure simplifies assembly while delivering die shear strength above 20 MPa. Used for flip chip attachment in silicon carbide (SiC) and gallium nitride (GaN) IGBT power modules, LED packaging, and high-speed optical network devices on copper, gold, and silver metallisation.

, , , , lighting semiconductorscreen stencilcopper gold silver
DM-ADH-11010S

UV-curable barrier adhesive for roll-to-roll (R2R) rotary screen lamination of flexible perovskite (PSC) and organic photovoltaic (OPV) solar cells on PET. High moisture barrier properties protect moisture-sensitive perovskite and organic active layers, extending device lifetime, while rapid UV cure suits continuous high-throughput R2R production.

, , perovskite-solar-cell solar-cell-opvr2r-rotary-screenpet

Available globally via our distributor network or direct purchase or via our online store, our materials are developed with extensive durability testing and available in high volume using our large-scale manufacturing capabilities.

Whether off-the-shelf or fully customised, we ensure performance, consistency, and reliability at every stage of your product’s lifecycle.

Benefits of our Assembly Materials

  • High bond strength and thermal stability for demanding assembly environments.
  • Electrically conductive, thermally conductive, and insulating adhesive options.
  • Low outgassing, corrosion-resistant formulations to protect sensitive components.
  • Compatible with screen printing, stencil printing, and automated dispensing processes.
  • Excellent adhesion to a wide variety of substrates including metals, ceramics, and polymers.
  • Available for low- and high-temperature curing to suit diverse process requirements.
  • Custom formulation development to meet specific mechanical, electrical, or environmental needs.

Supported by in-house testing, validation, and mass production facilities for full lifecycle support.

    Assembly materials