Dycotec Materials DM-INS-2510 is a screen printable insulator coating that is used in stretchable applications such as wearable devices, sensors and medical devices. The paste can be applied to elastomeric and textile substrates. The paste is cured at temperatures between 80-140˚C.

£159.10£189.70

p

Sample pricing available for on-line purchasing only, please contact us directly for competitive bulk pricing

Availability: usually ships within 5 days

Product Description

Dycotec Materials DM-INS-2510 is a screen printable insulator coating that is used in stretchable applications such as wearable devices, sensors and medical devices. The paste can be applied to elastomeric and textile substrates. The paste is cured at temperatures between 80-140˚C.

Product Benefits

• Low temperature drying temperature (80-140˚C)
• Stretchable to ~50%
• Excellent water resistance
• Compatible with a wide variety of substrates including TPU, textiles, PET

Paste Preparation

DM-INS-2510 is a single part paste system. Once the paste has been removed from the container for printing, this may introduce contamination. Please do not replace the paste in the container. The paste should be gently stirred before use avoiding incorporation of air bubbles. Avoid paste drying on screen, use flood-print-flood process to avoid drying.

Additional information

More
Size (g)

100g, 250g, 1Kg

Viscosity after mixing (Pa.s)

4 – 8

Thinner

For slight adjustments in viscosity, use DM-INS-2510-DT

Solids Content (%)

52 -56%

Substrate

TPU, Elastomer films, Textiles

Screen

180 SS, 25 µm emulsion

Print Speed

70 mm/s

Squeegee Hardness

80A Durometer Shore

Cure Process

Convection oven or IR heating

Cure Temperature (oC)

80 – 140oC

Cure Time (mins)

20 – 30 mins

Adhesion

5B

Hardness

64 (ShoreD)

WeightN/A

Still Unsure?

Development

We offer a tailored formulation development service to meet specific customer requirements for stretchable inks

Applications

  • Wearables
  • Sensors
  • Medical
  • General printed electronics