DM-INS-2514 is a screen printable encapsulation coating that is used in stretchable applications such as wearable devices, sensors and medical applications. The paste can be applied to elastomeric and textile substrates. The paste is cured at temperatures between 80-120˚C.



Sample pricing available for on-line purchasing only, please contact us directly for competitive bulk pricing

Availability: usually ships within 5 days

Product Description

Dycotec Materials DM-INS-2514 is a screen printable stretchable insulator coating that is used in wearable applications such as ECG/EMG, heaters, sensors and medical devices. The paste can be applied to elastomeric and textile substrates. The paste is cured at temperatures between 80-120˚C and is compatible with Dycotec’s range of stretchable conductive and adhesive pastes.

Product Benefits

• Low temperature drying temperature (80-120˚C)
• Stretchable to 60%
• Excellent water resistance
• Compatible with a wide variety of substrates including TPU, textiles, PET
• Compatible with Dycotec stretchable conductive pastes (DM-SIP-2004, DM-SIP-2005)

Paste Preparation

DM-INS-2514 is a single part paste system. Once the paste has been removed from the container for printing, this may introduce contamination. Please do not replace the paste in the container. The paste should be gently stirred before use avoiding incorporation of air bubbles. Avoid paste drying on screen, use flood-print-flood process to avoid drying.


Additional information

Size (g)

100g, 250g, 1Kg

Viscosity after mixing (Pa.s)

8 – 18


For slight adjustments in viscosity, use DM-INS-2514-DT

Solids Content (%)

54 – 60%


Transfer Sheets, Textiles


180 SS (95/45), 23 µm emulsion

Print Speed

70 – 300 mm/s

Squeegee Hardness

80A Durometer Shore

Cure Process

Convection oven or IR heating

Cure Temperature (oC)

80 – 120 deg.C

Cure Time (mins)

10 – 30 mins





Elongation (%)

60 %

Typical Print Thickness

13-15 μm

Dielectric Constant (ASTM D150)

2.0 at 1 KHz, 24 μm print thickness (2 layers)

Breakdown Voltage (ASTM D149)

>14 kV/mm

Surface Resistivity (ASTM D257)

>1 x 10^13 Ω/□

Volume Resistivity (ASTM D257)

>1x 10^13 Ω.cm


Still Unsure?


We offer a tailored formulation development service to meet specific customer requirements for stretchable inks


  • Wearables
  • Automotive
  • Sensors
  • Medical
  • Sports and Leisure
  • General printed electronics