Dycotec DM-SIP-3061S is a screen printable silver paste that is used for membrane display, sensors and general printed electronics applications. The paste is compatible with low temperature substrates such as polycarbonate, paper and PET.

£254.70£993.40

p

Sample pricing available for on-line purchasing only, please contact us directly for competitive bulk pricing

Clear
Availability: usually ships within 5 days
In Stock

For organisations based in the Far East, please contact iCreate to purchase this material

DM-SIP-3061S

Additional information

More
Size (g)

100g, 250g, 1Kg

Viscosity after mixing (Pa.s)

5-15

Thinner

For slight adjustments in viscosity use DM-SIP-3061-DT

Coverage

160 cm2/g

Solids Content (%)

75-78%

Substrate

Paper, PC, PET

Screen

13 μm emulsion, 325 DPI

Flood Speed

50 mm/s

Print Speed

50 mm/s

Squeegee Hardness

90A Durometer Shore

Squeegee Pressure

3.5 Kg

Squeegee Angle

60o

Squeegee Length

220 mm

Sheet Resistance

<8 mΩ/□/25µm

Adhesion

5B ASTM D3359

Line Resolution

100 µm

Cure Process

Convection oven or IR heating

Cure Temperature (oC)

120-140oC

Cure Time (mins)

10 mins

Volume Resistivity

<22 µΩ.cm

WeightN/A

Still Unsure?

Development

We offer a tailored formulation development service to meet specific customer requirements for silver ink and pastes this may include:
  • Specific electrical conductivities
  • Development for particular substrates
  • Thermoset and thermoplastic products
  • Curing Temperatures, including temperatures <100 deg. C
  • Different deposition techniques such as syringe, spray or other commonly used printing/coating techniques
  • Chemical compatibility
  • High resolution structures

Applications

  • Paper based applications
  • Sensors
  • Heater bus-bars
  • General printed electronics on paper and plastic substrates