Dycotec DM-SIJ-3200 is a nanosilver based ink for inkjet use for general printed electronics applications such as sensors, heaters, display and thin-film PV



Sample pricing available for on-line purchasing only, please contact us directly for competitive bulk pricing

Availability: usually ships within 5 days

For organisations based in the Far East, please contact iCreate to purchase this material

Product Description

Dycotec DM-SIJ-3200 is a nanosilver inkjet printable ink that is used for general printed electronics applications such as sensors, heaters and solar cell. The ink offers excellent electrical conductivity at low curing temperatures (100oC). It can be used on PET, PI and paper substrates.

Product Benefits

• Excellent electrical conductivity (4mΩ/sqr/25μm) at 100oC
• Low temperature sintering (100oC)
• Excellent adhesion

Ink Preparation

Gently stir before use. Avoid incorporating air bubbles. Once printed, the Ink should be dried at 60-80oC for 20 mins prior to curing.

Additional information

Size (g)

100g, 250g, 1Kg

Viscosity (cps)

12 – 20 cps



Surface Tension

31 – 34 mN/m

Solids Content (%)

36 – 39%


Paper, PET, Polyimide

Cure Temperature (oC)

100 – 140oC

Cure Time (mins)

10 – 30 mins

Sheet Resistance

4 mΩ/sqr/25µm at 100oC

Volume Resistivity

10 µΩ.cm at 100oC




1-2 µm depending on ink-jet print deposition set-up

Weight N/A

Still Unsure?


We offer a tailored formulation development service to meet specific customer requirements for silver ink and pastes this may include:
  • Specific electrical conductivities
  • Development for particular substrates
  • Thermoset and thermoplastic products
  • Curing Temperatures, including temperatures <100 deg. C
  • Different deposition techniques such as syringe, spray or other commonly used printing/coating techniques
  • Chemical compatibility
  • High resolution structures


  • Solar Cell
  • Sensors
  • Heaters
  • Display
  • General printed electronics