DM-RES-14401
DM-RES-14401 is an RoHS compliant low cost silver-palladium (2.0 %) resistor paste intended to be used as heating elements on ceramics and dielectric coated steel substrates.
£412.90 – £2,064.40
Sample pricing available for on-line purchasing only, please contact us directly for competitive bulk pricing
Product Description
DM-RES-14401 is an RoHS compliant low cost silver-palladium (2.0 %) resistor paste intended to be used as heating elements on ceramics and dielectric coated steel substrates.
Product Benefits
• Controlled Temperature Coefficient of Resistance (TCR) suitable for heater use, 1500 ± 100 ppm/oC
• Compatible with DM-SIP-14001 for end terminations and Dycotec insulator dielectric pastes such as DM-INS-14100
• Controlled sheet resistance of 100 ± 20 mΩ/sqr (at 12.5µm fired thickness)
• RoHS compliant
Paste Preparation
Bring paste up to Clean room temperature (20-25°C) by storing in the print area at least 2 hours prior to printing. Before use, the paste should be thoroughly but gently stirred with a spatula avoiding incorporation of air bubbles. Thinning of the paste is not recommended but for slight adjustments in viscosity, DM-RES-14401-DT may be carefully used.
Additional information
More | ||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ||||||||||||||||||||
|
Still Unsure?
Development
We offer a tailored formulation development servcie to meet specific customer requirements for high pastes this may include:- Different paste systems with a range of electrical conductivity and silver solid loading (%)
- Dielectric systems with varying CTE and with adhesion to different substrates
- Overglaze systems
- TCR systems
- Other precious metal systems
Applications
- Heaters on steel
- Circuit on steel
- Industrial
- Consumer
- Thick film on steel