Product Description
DM-TIM-15035 is a one part, non-silicone high thermal conductivity paste. The materials are supplied in a syringe for use on automated dispensing equipment or can be manually processed depending on packaging option. Materials do not require a cure/dry process. As a non-silicone paste, this material does not suffer from silicone oil leach or migration effects.
Product Benefits
- Non-silicone (no migration, leach-out or contamination)
- Excellent stability for devices operating at high temperature
- High Thermal Conductivity (3.5 W/m·K)
- No cure
- Readily adopted for high volume production, tacky/thixotropic paste
Applications
Interface for semiconductors requiring low pressure or spring clamp mounting. Consumer electronics, Set-top boxes, IP routers, ECUs Memory and Power modules. CPU to Heat sink, Transistors, Diodes, IGBTs, Rectifiers, LED. TEC modules, Telecommunication hardware and as a gap filler for battery systems.
Additional information
| Weight | N/A |
|---|---|
| Viscosity (50s-1) | 15 – 24 Pa.s |
| Density (ASTM D792) | 2.8 g/cm3 |
| Colour | Grey |
| Flow Rate (30cc syringe, no tip, 90psi) | 80 – 120 g/min |
| Thermal Conductivity (ASTM D5470) | 2.5 W/m.K |
| Thermal Contact Resistance (ASTM D5470) | 5.3 x 10-5 m2.K/W |
| Dielectric Strength (ASTM D149 MOD) | >6 kV/mm |
| Volume Resistivity (ASTM D257) | >1 x 10+11 Ω.cm |
| Dielectric Constant (ASTM D149) | 10.9 (1 KHz) |
| Size (cc) | 30 cc (90g) (Minimum Order Quantity: 3 syringes), 50 cc (150g) (Minimum Order Quantity: 3 syringes) |
| Applications | Battery, Lighting, Semiconductor |
| Key Features | 3.5 W/m·K, 30cc Syringe, 50cc Syringe |
| Deposition Method | Pressure-Time Dispense |
| Substrate | Aluminium heat sinks, PCB, Semiconductor device surfaces |
Development
We offer a tailored formulation development service to meet specific customer requirements for thermal interface materials this may include:
- Customised mechanical properties eg conformability, bond-line thickness
- Customised thermal conductivity and thermal interface resistance
- Epoxy, silicone, acrylic and urethane systems
- Develop for range of deposition systems
- Application testing, process development and modelling at our UK R&D technology development centre
- Training
Applications
- Consumer electronics
- Set-top boxes,
- IP routers
- ECUs Memory
- Power modules eg IGBTs
- LED
- CPU to Heat sink
- Rectifiers
- Gap filler for batteries









