Thermal Interface Materials (TIMS) are thermally conductive compounds, such as gels, putties, adhesives, pastes and phase change films, applied between a heat-generating electronic component and a heat sink or heat spreader. By filling microscopic air gaps between the two surfaces, TIMs dramatically improve heat transfer, keeping devices such as batteries, microprocessors, power transistors and LEDs within safe operating temperatures.
Why Thermal Interface Materials Matter in Electronics Thermal Management
Every electronic device produces heat, and modern components are producing more of it than ever. Higher power densities in electric vehicle batteries, data-centre processors, 5G infrastructure and high-brightness LED lighting mean that heat must be removed quickly and reliably, or component performance drops and lifetime shortens dramatically.
The problem is that even precision-machined surfaces are never truly flat. At a microscopic level, the mating faces of a chip and a heat sink only touch at a tiny fraction of their surface area; the rest is filled with trapped air, which is an excellent thermal insulator. This trapped air creates high thermal contact resistance and forms a bottleneck for heat flow.
Thermal interface materials solve this by conforming to both surfaces and displacing the trapped air with a material of far higher thermal conductivity. The results are measurable and commercially significant:
- Lower junction temperatures: components operate within safe thermal limits and do not fail through overheating.
- Extended component lifetime: reliability of batteries, semiconductors and LEDs improves as thermal stress is reduced.
- Reduced total cost of ownership: lower power consumption, smaller cooling systems and, in many cases, elimination of complex liquid cooling.
Because of this, TIMs are now considered a critical enabling material in the semiconductor, automotive, battery and aerospace industries.

Types of Thermal Interface Materials and How to Select the Right One
There is no single "best" TIM; the correct choice depends on the application, assembly process and thermal requirements. Dycotec Materials manufactures a complete portfolio of high thermal conductivity interface materials, covering the main product families:
1. Liquid Gap Fillers: Non-Silicone Thermal Gels & Putties
Conformable, dispensable non-silicone thermal gels and putties are applied by pressure-time dispensing between the device and heat sink. Dycotec's range offers thermal conductivities from 2.5 to 8.5 W/m·K and is supplied in syringes or pots to suit both manual and automated dispensing. The materials flow into uneven gaps, remain soft in service, absorb thermo-mechanical stress as the device heats and cools, and, being silicone-free, avoid siloxane outgassing and contamination issues in sensitive optical and electronic assemblies.
2. Phase Change Materials (PCMs)
Dycotec's phase change materials are a stencil/screen printed product portfolio with thermal conductivities from 1.75 to 3.3 W/m·K, providing superior heat transfer. Solid and easy to handle at room temperature, the material softens once the device reaches operating temperature and spreads into a thin film, flowing into surface gaps to minimise thermal contact resistance. PCMs combine the handling convenience of a pad with the low thermal resistance of a paste.
The materials are readily dispensed using stencil printing automation equipment, and stencil/screen printing enables a reduced bond-line thickness of less than 75 µm. They are provided in 250g or 1kg packs, so they can be easily handled by operators when applying materials to stencil printing equipment. Contact Dycotec Materials for application notes on recommended process conditions.
Benefits of Dycotec Thermal Interface Phase Change Materials
-
- Range of thermal conductivities available from 1.75 to 3.3 W/m·K
- Non-silicone: no migration, leach-out or contamination
- PCM additives provide excellent thermal transfer at the interface by removing air-filled voids
- Electrically insulative
- Excellent thermal conductivity (up to 3.3 W/m·K)
- Excellent durability (150 °C bake test)
- Stencil/screen printed, enabling reduced bond-line thickness (<75 µm)
3. Thermally Conductive Epoxy Adhesives
Thermally conductive epoxy adhesives create a rigid, permanent mechanical bond between the component and the heat sink while simultaneously conducting heat, with excellent thermal conductivities of up to 4 W/m·K. Supplied in syringes or pots, they are ideal where mechanical fixings (clips, screws) are impractical and a structural, heat-conducting joint is required.
4. Metal-Based Die Sinter Attach Materials
For the most demanding semiconductor packaging applications, metal-based sinter die attach adhesives deliver exceptional thermal and electrical conductivity at the die level. These products form part of the Dycotec Assembly Materials range, which sits alongside the thermal interface materials portfolio.
Key TIM Selection Criteria
When comparing thermal interface materials, engineers should evaluate:
-
- Bond line thickness (BLT): minimise it to maximise heat transfer.
- Thermal interface (contact) resistance: the true measure of in-application performance.
- Bulk thermal conductivity (W/m·K): higher values move more heat, but only alongside low contact resistance.
- Operating temperature range: performance must not degrade over the product's lifetime.
- Material safety and compliance: including silicone-free requirements.
- Conformability and stress relief: the TIM must accommodate expansion and contraction through thermal cycling.
Custom Formulation, Testing and Supply
In addition to the standard range of thermal interface materials, Dycotec offers customised formulation development. Extensive facilities for the development, testing and mass production of thermal interface materials ensure high levels of reliability, particularly at high operating temperatures, without the materials hardening over time.
Materials can be supplied very rapidly, with typical shipping times within 5 days, in most packaging types, and in volumes from sample quantities through to high-volume material supply. Contact Dycotec Materials today to discuss your thermal interface application requirements with one of our thermal management specialists.
Frequently Asked Questions about Thermal Interface Materials
What is a thermal interface material (TIM)?
A thermal interface material is a thermally conductive material placed between a heat-generating component (such as a CPU, battery cell or LED) and a heat sink or spreader. It fills microscopic air gaps between the two surfaces so heat can flow efficiently out of the device, keeping it at a safe working temperature.
Why are TIMs important?
Air trapped between imperfect surfaces is a poor thermal conductor and creates a bottleneck for heat removal. TIMs displace this air, lowering thermal contact resistance. The result: components run cooler, last longer, consume less power, and systems can often avoid costly liquid cooling, reducing total cost of ownership.
What are the main types of thermal interface materials?
The principal families are: non-silicone thermal gels and putties (liquid gap fillers, 2.5 to 8.5 W/m·K), phase change materials (1.75 to 3.3 W/m·K), thermally conductive epoxy adhesives (up to 4 W/m·K), and metal-based sinter die attach adhesives, which are found in the Dycotec Assembly Materials range.
How does a phase change material work?
A phase change material is solid at room temperature, making it clean and easy to handle during assembly. When the device heats up in operation, the PCM softens and flows into surface irregularities, forming a thin, low-resistance thermal film between the component and the heat sink. Dycotec PCMs are stencil/screen printed with thermal conductivities up to 3.3 W/m·K, are non-silicone and electrically insulative, achieve bond-line thicknesses below 75 µm, and demonstrate excellent durability in 150 °C bake testing.
What thermal conductivity do Dycotec thermal interface materials offer?
Non-silicone gels and putties range from 2.5 to 8.5 W/m·K, thermally conductive epoxy adhesives reach up to 4 W/m·K, and stencil/screen printed phase change materials range from 1.75 to 3.3 W/m·K. Customised formulations can also be developed for specific thermal, process or reliability requirements.
How are Dycotec thermal interface materials supplied?
Gels, putties and epoxy adhesives are supplied in syringes or pots for manual or automated dispensing. Phase change materials are supplied in 250 g or 1 kg packs for easy handling on stencil printing equipment. Most packaging types are available, in volumes from samples to high-volume supply, with typical shipping times within 5 days.
What is the difference between a thermal gel and a thermally conductive adhesive?
A thermal gel or putty stays soft after application, allowing rework and absorbing stress from thermal cycling, but requires a mechanical fixing to hold the assembly together. A thermally conductive epoxy adhesive cures into a rigid, permanent bond that attaches the component and conducts heat, with no clips or screws needed.
How do I choose the right TIM for my application?
Evaluate bond line thickness, thermal interface resistance, bulk thermal conductivity, long-term stability at operating temperature, material safety, and the material's ability to conform and relieve stress through heating/cooling cycles. If in doubt, contact Dycotec for application-specific guidance or a custom formulation.
Where can I buy high thermal conductivity interface materials?
Browse the full range of Dycotec Thermal Interface Materials (high thermal conductivity products), including gels, putties, phase change materials and thermally conductive adhesives, available worldwide with technical support.
Further reading on thermal interface materials
Two shorter guides go deeper on the choices this article introduces: the advantages of thermal pastes versus thermal pads, and why non-silicone thermal interface materials are replacing silicone systems in optics, sensors and high-reliability electronics. Our thermal interface materials business page brings the range, case studies and manufacturing in the UK together in one place.
Need Help Selecting a Thermal Interface Material
Our technical team can recommend the most suitable thermal interface material based on your application, substrate, printing method, and performance requirements.






